Body Line Products and Supplies
Waterproof Sandpaper
The best quality for achieving a smooth surface free of visible defects such as roughness, scratches and unevenness.
Used on metal surfaces, paint coatings and plastics, with controllable results, to prepare surfaces for the following process stages.
- CP35: Latex waterproof paper
- CP38: European latex waterproof paper
Applications:
- Metal surfaces
- Paint coatings
- Plastic coatings
- Automotive, woodworking, construction, power plants and more
Available Grades:
Waterproof Sanding Discs
Used for deep material removal of deep scratches and unevenness on metal surfaces, paint coatings and plastics, with controllable results, using sanding discs (pneumatic and other tools).
- Available in 3, 5 and 7-hole patterns and without holes
- Available in 75 mm and 150 mm diameters
Paint Line Products and Supplies
Automotive Paints
Automotive paints are a range of specialized coatings designed for painting, repairing and protecting the metal and polymer surfaces of vehicles. Using modern technologies, these products not only create a uniform, glossy and high-quality finish, but also protect the vehicle body against environmental factors, corrosion, ultraviolet radiation and abrasion.
- Oven-cured primer and paint
- Primer and paint for plastic parts
- Fast-drying and two-component clear coats
- Air-dry paint and primer
- Two-component epoxy primer
- Two-component repair paints
Thinners and Solvents
Specialized thinners and solvents are used to adjust paint viscosity, improve application quality, increase coating uniformity and clean painting equipment. Compatible with a wide range of paint systems, these products play an important role in achieving the desired quality, improving painting efficiency and preparing surfaces across different industries.
- Oil-based thinner
- Fast-drying thinner (10K, 15K and 20K grades)
- Epoxy thinner
- Retouch and custom thinner
- Solvents such as industrial alcohol, xylene, butyl glycol and isopropanol
- Polyurethane thinner
- Oven-cured thinner
- Washing thinner
Plastisol, Sealers, Insulation and Mastic
Plastisol, sealer, insulation and mastic products are designed for sealing, joint sealing, insulating and protecting vehicle parts and bodies, as well as other industrial surfaces. With good adhesion, high flexibility and strong resistance to moisture, vibration, corrosion and environmental conditions, they play an effective role in increasing durability, reducing the penetration of external elements and improving the final quality of products.
- Air-dry and oven-cured automotive sealer
- Air-dry and oven-cured automotive insulation
- Body mastic: spot-weld and foam types
- Sealing sealer for automotive use and metal containers
- Plastisol for design and photo printing on fabric
Special Automotive Products
This group includes specialized products for preparing, maintaining and completing painting, cleaning and assembly processes in the automotive and industrial sectors. By improving surface quality, removing contaminants, increasing adhesion, protecting parts and simplifying operations, these products play an important role in improving the final quality, durability and performance of the end product.
- Automotive windshield washer fluid
- Automotive antifreeze
- Paint stripper
- General washing
- Water-based adhesive
- Air-dry adhesive
- Polyurethane adhesive
- Waterproof paste sealing adhesive
- Anti-dust particle absorber
Traffic Paints
Traffic paints are specialized coatings for line marking and signage on roads, highways, parking lots and urban spaces. With high adhesion, good resistance to abrasion, weather conditions and continuous traffic, they ensure long-lasting durability and good visibility. These products play an important role in increasing safety, guiding traffic correctly and improving order in urban and industrial environments.
- Cold single-component paints
- Hot two-component traffic paints
- Safety paints for stairs
- Waterproof paints for slippery walkways
- Three-component traffic paints
Protective Paints
Protective paints are made to increase the durability of metal and structural surfaces and protect them against environmental conditions and corrosive agents. By forming a layer that resists moisture, sunlight, fire, heat and other damaging factors, these coatings prevent early deterioration of surfaces, and are a suitable choice for steel structures, industrial facilities, industrial sheds and construction projects.
- Oil-based anti-corrosion primer
- Paints for structures and industrial sheds
- Moisture-resistant and anti-UV paints
- Fire-retardant and refractory paints
- Paint for galvanized surfaces
Epoxy and Polyurethane Flooring
Epoxy and polyurethane floor coatings are a professional solution for creating seamless, durable and hygienic surfaces in industrial, commercial and healthcare environments. With high resistance to abrasion, chemicals, moisture and mechanical loads, they extend floor life while providing easy cleaning and an attractive appearance, making them an ideal choice for high-traffic and sensitive spaces.
- Epoxy hall flooring with primer and mid-coat
- Self-leveling epoxy for sanitary areas
- Polyurethane flooring with an epoxy base layer
Industrial Paints
Industrial paints are durable, high-performance coatings developed to protect equipment, machinery, steel structures and industrial facilities in harsh working conditions. With good resistance to corrosion, chemicals, moisture, heat and damaging environmental factors, they extend equipment life, reduce maintenance costs and preserve surface quality across different industries.
- Epoxy primer, mid-coat and topcoat paints
- Epoxy zinc phosphate and zinc-rich primers
- Epoxy phenolic, glass flake and acid-resistant paints
- Polyurethane paints for chemical environments
- Oil-based anti-corrosion paints
Building Paints
Building paints are a range of decorative and protective coatings used to beautify interior and exterior building surfaces and extend their durability. By forming a uniform, durable and washable finish, they protect surfaces against moisture, dirt and weather, while allowing a wide range of decorative and architectural effects.
- Oil-based primer and anti-rust
- Gloss, semi-gloss and matt oil paints
- Interior and exterior (facade) acrylic paints
- Wall and ceiling emulsion paints
- Kenitex and moisture-resistant facade paints
- Decorative and patina paints
Industrial Air FiltersIndustrial air filters available
Request a Quote
Durable Cardboard Filter
Durable cardboard filters are designed to capture solid and liquid particles produced by spraying paint, lacquer, adhesives and industrial coatings.
Product Features:
- Filtration efficiency up to 95%
- Service life up to 6 times longer than common layered filters on the market
- Suitable for automotive paint booths and other industries
Air Glass Filter
These filters capture airborne particles with high efficiency using dense, continuous fibers, and are used as pre-filters in air handling units.
Product Features:
- G2 and G3 efficiency per EN779:2012 for primary air filtration
- Available in metal frames or rolls in various sizes and thicknesses
- Withstands temperatures up to 80 °C and 100% humidity
Activated Carbon Filter
This filter improves ambient air quality by absorbing odors, chemical vapors and some suspended pollutants.
Product Features:
- Up to 65% suspended particle capture efficiency
- Made from synthetic fiber media impregnated with 50 to 60% activated carbon
- Suitable for production line ventilation systems
Polyester Roll Filter
Made from synthetic fibers, this filter is used as a pre-filter in air ventilation systems to capture and hold dust.
Product Features:
- Low pressure drop, high particle-holding capacity and long service life
- G2, G3 and G4 efficiency per EN779:2012
- Continuous temperature resistance up to 70 °C and 100% humidity
Honeycomb Filter
This filter, with microfiberglass and/or activated carbon media, is built to remove odors, vapors and chemical pollutants from the airflow.
Product Features:
- Absorbs odors, vapors and chemical pollutants
- Protective screen for strength and even airflow distribution
- Effectively reduces unpleasant odors and volatile organic compounds (VOCs)
- Metal frame, initial pressure drop of 40 Pa
- Can be produced in various sizes and capacities
Bag Filter
This filter is made with polyester media and ultrasonic stitching, which prevents air leakage and increases filtration efficiency.
Product Features:
- Suitable as a pre-filter or main filter in HVAC systems and air handling units
- G4 efficiency per EN779:2012
- High strength and long life, resistant to moisture and heat
ULPA Filter
These filters are made of microfiberglass media or a combination of it with synthetic fibers.
Product Features:
- Captures approximately 100% of particles up to 12.5 microns
- Low initial pressure drop of about 240 to 260 Pa
- Available in standard and custom sizes, suitable as a first-stage filter in HVAC and air handling systems
Glass Fiber Filter
This filter is made of continuous glass fibers and is used as a pre-filter or final filter to remove suspended particles in ventilation systems and industrial environments.
Product Features:
- Filtration efficiency of 70 to 98 percent across various filtration classes
- Made of continuous glass fibers in common thicknesses of 25 and 100 mm, available as rolls or framed
- Low initial pressure drop (25 to 30 Pa)
- Widely used in air handling units, hospitals, pharmaceuticals, painting, kitchen hoods and industrial equipment to extend the life of final filters and improve air quality
Soft and Coarse Polishing Compounds
Soft and coarse polishing compounds are used for shine, gloss and brilliance, and also to remove scratches left by sanding and cosmetic paint defects such as dirt nibs, dullness and orange peel. They are applied with special pads.
- Soft polishes (Fine Compound and more)
- Coarse polishes (Ultra Heavy Cut and more)
- Single-step and multi-step polishes
Foam and Lambswool Pads
In polishing, these pads are generally used for controlled removal of surface layers and light scratches left by sanding, and to add gloss, shine and brilliance to metal and plastic surfaces.
- Lambswool pads
- Soft, medium and coarse foam pads
- Synthetic fiber pads
Backing Pads
Used to attach different pads to the backing pad so they can be used for machine polishing and sanding.
Available in orbital and rotary types, used in polishing and sanding operations.
- Rotary
- Orbital
Paper and Glass Tapes
Widely used in industrial production plants such as automotive and home appliance manufacturing.
- For various painted surfaces in the automotive industry
- Suitable adhesion and heat resistance
- Available in a variety of films and sizes
Self-Adhesive Nylon Covers
Self-adhesive nylon covers are used to cover painted surfaces of vehicles, plastic and metal bumpers, and glass surfaces, effectively protecting them from any finishing work carried out nearby.
The adhesive on the nylon cover also has no chemical effect on the covered surfaces.
- Suitable surface covering to protect against finishing work
- No chemical effect from the nylon cover adhesive
Other Items
Terry and Microfiber Cloths
These cloths are made of very fine synthetic fibers, a blend of polyester and nylon. Thanks to this structure, the fibers have high absorbency and remove all kinds of grease, fine particles, dust and other contaminants.
- Body shops, paint repair and the detailing industry
- Glass, leather and display screen industries
- Used in the automotive industry
Tanzif Cleaning Cloths
Tanzif cloths can absorb many times their own weight in water and liquids and, unlike ordinary cloths, clean surfaces without streaks or lint, removing grease and dirt.
- Available in cotton and standard tanzif types
- Very high absorbency
Tampon and Nonwoven Tack Cloths
Tampon and nonwoven tack cloths are similar to sterile gauze but have some stickiness. They can be used for cleaning and collecting particles left from sanding, and can also pick up lint and remove residual sanding particles.
- Tack cloths in two types: tampon and nonwoven